Firma49 List

Accessories - 3D Printed

Kit Number	Kit Name	Comments	Previews	Reviews	Articles
A001	U.S. Fire Extinguishers	12 pcs.
A003	M72 LAW	2+2 pcs.
A004	U.S. Grenades	3x10 cs.
A005	M20A Super Bazooka	1+1 pcs.
A006	M20A Super Bazooka 3,5" rocket & wooden crate	3 in one
A007	RPG-7
A008	Cal. .50 M2 Ammo Box	10 pcs.
A009	Cal. .30 M1 Ammo Box	10 pcs.
A010	Hafthohlladung	10 pcs.

Diorama Items
3D printed

Kit Number	Kit Name	Comments	Previews	Reviews	Articles
A033	Cheese cake
C001	Guitars
C002	Milk Can	6 pcs.
C003	Water Pump	3D printed water pump with through. The former is 24.8 mm high, the latter 20.1 mm wide. Careful removal of the printing supports will be required, which first need to be identified as such. Detail is exquisite. Fine striations from the printing process can be seen, which can be considered a feature, but will probably be less visible under a coat of paint. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
C004	Fire Extinguisher	6 pcs.
C005	Violin & Contrabass
C006	Wooden Felly Wheels	4x4 pcs.
C007	Glass Bottles	5 identical sprues of 6 different transparent bottles, between 3.3 and 3.8 mm, which corresponds to approximately 24 to 27cm in 1/72, which seems ok for a 75cl bottle. In my opinion, one bottle has a neck that is too narrow to be to scale; it’s also the bottle where that same neck has not been entirely printed (or broke off). The parts will be great representation of empty, clear glass vessels. I am not sure how convincingly they can be painted to look like bottles that are (half) full or made from colored glass. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of transparent parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
C008	Barrow
C009	Gasmask	10 pcs.
C010	Stove	3D printed rustic stove with chimney. The former is 16.1 mm high, the latter 15.1, not counting the curved sections. Detail is exquisite. Fine striations from the printing process can be seen, which can be considered a feature, but will probably be less visible under a coat of paint. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included, which only shows one curved section, while two are provided. - R. Haelterman	Picture 1 Picture 2
C011	Beer Crates with Bottles	2 identical 3D printed crates and 40 identical clear bottles. The former are 5.1mm by 6.8mm by 3.4mm, the latter are 3.3mm high. As the bottles would scale out to roughly 24cm, that would mean that we are looking at 50cl vessels. As most beer bottles I have seen come in colored glass, I would believe this set would be better placed to represent milk bottles, though. Detail is exquisite. Fine striations from the printing process can be seen on the crates, which can be considered a wood feature, but will probably be less visible under a coat of paint. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black and transparent parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
C012	Table with 4 chairs
C013	Cooker	3D printed rustic cooking stove with chimney. The former is 16.3mm by 9.0mm by 11.7 mm, not counting the supports (which are the four small parts on the sprue), the latter 22.5 mm high, not counting the curved sections. Detail is exquisite. Fine striations from the printing process can be seen, but will probably be less visible under a coat of paint. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
C014	Cupboard	3D printed rustic cupboard, measuring 25.7mm by 12.9mm by 7.3mm, not counting the supports (which are the four small parts on the sprue). Detail is exquisite. Fine striations from the printing process can be seen on the crates, which can be considered a wood feature, but will probably be less visible under a coat of paint. The doors are separate parts, but would benefit from adding some clear plastic to represent glass. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
C015	Coffers
C016	Phonograph	3D printed rustic gramophone (aka phonograph), with the typical large flaring horn. The set comes in 4 parts, but I haven’t been able to identify the (almost) round object. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. The latter shows the winding crank, which isn’t included, probably due to limitations in the printinc process. - R. Haelterman	Picture 1 Picture 2
C017	Coffee table
C018	Rocker
C019	Phonograph relax set
C020	Garden set	3+3 pcs.
C021	Air-Condition & Dish Antenna
C022	Wooden Felly Wheels 180cm	2 pcs.
C023	Vietnamese Pot & Bowl
C024	Italian roof tile - type A	60 pcs.
C025	Italian roof tile - type B	30 pcs.
C026	Balalaika
C027	Dustbin "Prague City"	2 pcs.
C028	Dustbin	2 pcs.
C029	TV & game console
C030	Wooden cable reel (dia 2m)
C031	Metal cable reel (dia 2m)
C032	Tins	12+12 pcs.
C034	Cloth rack
C035	Notebook 10.5", 13" & 15.6"
C036	Plastic water barrel 20l	4 pcs.
C037	Plastic barrel 60l	3 pcs.
C038	Plastic barrel 120l	3 pcs.
C039	Plastic barrels	7 pcs.
C040	Chair	4 pcs.
C041	Plastic Dustbin 120l	2 pcs.
C042	Stand with lavor, water jug and soap dish
F001	WW2 German Gebirgsjäger boots	4x2 pairs
F002	WW2 German army angle boots	4x2 pairs
Z001	Dog with house
Z002	Goat
Z003	Cats
Z004	Rats	6 pcs.

Figures
3D printed

Kit Number	Kit Name	Comments	Previews	Reviews	Articles
A002	WW2 German soldier gear
F003	Heads in gasmask	10 pcs.
F004	Male heads	Ten 3D printed bare heads, which seem all to have slightly different facial expressions (even though the CAD design only shows six different heads). One has an eyepatch. I would need to paint them to see if the minute striations from the printing process would remain visible. What also will be interesting is to see if the helmets Firma49 provides (and which are very thin) would fit over these heads. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
F005	Hand palms	Ten 3D printed pairs of hands. Five pairs are identical, while the other five come in lively poses. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops has also been included. - R. Haelterman	Picture 1 Picture 2
F006	Hats	6 civilian 3D hats in three varieties (bowler and what might be Stetson and Fedora hats). These are printed so finely that they are translucent and care will thus be needed to remove them from their supports. There is no detail on the inside Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
F007	Bare legs - set 1	6 pairs
F008	WW2 Russian "Valenki"	3+3 pairs
F009	WW2 German M1939 Marschsiefel	3+3 pairs
F010	Bare legs - set 2	6 pairs
F011	Vietnamese traditional hat	10 pcs.
F012	Feldmütze M43 heads	10 pcs.
H001	British helmet Brodie MK1	10 identical 3D printed British Brodie Helmets (which in my opinion can work for both Mk I and Mk II type helmets). These are printed so finely that they are translucent and care will thus be needed to remove them from their supports. There is no detail on the inside (like the leather liner), nor is the typical helmet net provided. Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
H002	French helmet M15
H003	Czechoslovak helmet vz.32	10 pcs.
H004	German helmet M16	10 pcs.
H005	Fireman helmet	10 pcs.
H006	German Fallschirmjäger helmet M38	10 pcs.
H007	Soviet helmet SSh-39/40	10 pcs.
H008	German helmet M35/40 Stahlhelm	10 identical 3D printed German Stahlhelme. These are printed so finely that they are translucent and care will thus be needed to remove them from their supports. There is no detail on the inside (like the leather liner). Note that the scan I provided isn’t the best quality as my scanner has trouble capturing the details of black parts. That’s why a picture from Tracks & Troops (showing the CAD design) has also been included. - R. Haelterman	Picture 1 Picture 2
H009	U.S. helmet M1	10 pcs.
H010	British helmet Brodie MK1 - detail	10 pcs.
H011	French helmet M15 - detail	10 pcs.
H012	Soviet helmet SSh-39/40 - detail	10 pcs.
H013	German helmet M35/40 Stahlhelm - detail	10 pcs.
H014	German Fallschirmjäger helmet M38 - detail	10 pcs.
H015	Czechoslovak helmet vz.32 - detail	10 pcs.
H016	German helmet M16 - detail	10 pcs.
H017	U.S. helmet M1 - detail	10 pcs.
H018	Vietcong / NVA tropic helmet	10 pcs.

	Firma49
website: www.firma49.cz/en/ Facebook	email: info(at)firma49(dot)cz

Back to Manufacturers Page	Back to Home Page
Kit list last updated 09 December 2021